Product Categories

Decoration Furniture Glue

[6]

Contact Now

Hunan Baxiongdi New Material Co., Ltd.

Visit Website

City:changsha

Province/State:hunan

Country/Region:china

Contact Person:MissSU

View Contact Details

Contact Now

China Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours wholesale

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Name: Heat Resistant 60 to 100C Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Brand: DEYI
Price: 1 USD

Ask Latest Price

Video Channel

Brand Name :DEYI

Place of Origin :Hunan, China

MOQ :10000

Color :Clear

Viscosity :>100000 CPS/25℃

Mixture ratio :1:1

Work time :20 minutes

Touch dry time :30 minutes

Full cure time :24 hours

Lap shear strength :≥16 Mpa

Heat resistance :-60 to +100℃

Shelf life :12 months

Main material :Ethyl-cyanoacrylate

Acid resistance :Yes

Alkali resistance :Yes

Oil resistance :Yes

Waterproof :Yes

Non-flammable :Yes

Contact Now

Add to Cart

View Product Description

DEYI-730 30 minutes epoxy resin/ epoxy adhesive ab glue black and white

30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.

Technical Parameters

Color

Viscosity
(CPS/25℃)

Mixture

Work Time(25℃/100g)

Cure Time
(25℃/100g)

Lap Shear Strength
(St-St)

Heat Resistance
(℃)

Shelf Life
(25℃)

A:black

A:>100000

1:1

20 Minutes

Touch Dry:

30 Mins

≥16 Mpa

-60 to +100

12 months

B:milky white

B:>100000

Full Cure:
24 hrs

Products Description

STORAGE&WARNINGS

Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.

Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

DERECTIONS

* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.

CAUTIONS

Company Profile

Inquiry Cart 0