Hunan Baxiongdi New Material Co., Ltd.
We always put “Customers First” in our mind and commit ourselves to providing high quality service to all reliable and esteemed international partners and clients.
Add to Cart
PRODUCT DESCRIPTION
It is applicable to bonding and repairing machinery, electronics, automobiles, shipbuilding, chemical industry, and handicrafts. It forms excellent self and inter-bonding to substances such as metals, rubbers, leathers, various kinds of plastics.
DERECTIONS
Directions
* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
STORAGE&WARNINGS
Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
PARAMETERS
| Color | Cured Color | Viscosity (CPS/25℃) | Mixing Ratio | Work Time(25℃/100g) | Cure Time (25℃/100g) | Lap Shear Strength (St-St) | Heat Resistance (℃) | Shelf Life (25℃) |
| A:black | Light Black | A:>100000 | 1:1 | 5 Minutes | Touch Dry: 5-10 Mins | ≥16 MPa | -60 to +100 | 12 months |
| B:milky white | B:>100000 | Full cure: 12 hrs |